Error: Railure Reading Sector 0xfc From Hd1

SP Flash Tool is a flashing application that helps to have a backup of your device's firmware or flash the firmware dorsum to your device. Information technology is compatible with the MediaTek powered devices and works with virtually all the MediaTek Devices similar Smartphones, Smartwatches, etc. Tough the application is simple to employ, but information technology throws many errors without the proper data. So, today nosotros are going to share the list of SP Flash Tool errors (BROM Errors) and give their meanings and solutions to set them. We have covered almost all the SP Flash Tool errors on this folio, and if we have missed any, so yous can post them in the comment section beneath.

Complete List of SP Flash Tool Error Codes and their Meanings and Solutions

So, let'southward at present proceed to fix SP Wink Tool or Ready BROM Errors on your PC.

Table of Contents

  • ane How to Fix SP Flash Tool Errors (BROM Error Codes):
    • one.one SP Flash Tool Failed to enumerate COM Port
    • i.two The device automatically disconnects during flashing
    • i.3 SP Flash Tool remains at 0%
    • one.four Error: Initialize besprinkle file failed. Please check the scatter file name you lot load is legal
    • 1.5 Error: USB device non recognized
    • i.6 Error: Please select one ROM at least before execution
    • i.7 Error: PRO_INFO: Failed to get PMT info
    • 1.8 Error 1002: S_INVALID_ARGUMENTS
    • 1.9 Error 1012: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)
    • 1.ten Error 1003: S_COM_PORT_OPEN_FAIL (1003)
    • 1.11 Error 1013: BROM Fault: S_COM_PORT_OPEN Fail (1013)
    • 1.12 Error 1011: S_NOT_ENOUGH_STORAGE_SPACE
    • 1.13 Mistake 1022:
    • one.14 Error 1040: S_UNSUPPORTED_OPERATION (1040)
    • 1.xv Error 1042: BROM Error: S_TIMEOUT (1042)
    • i.16 Error two: BROM Fault: ?? (2)
    • ane.17 Error 4008: BROM Mistake : S_FT_DOWNLOAD_FAIL (4008)
    • 1.18 Error 2004: BROM Mistake : S_FT_DOWNLOAD_FAIL (2004)
    • one.nineteen Error 2005: BROM Fault: S_BROM_CMD_STARTCMD_FAIL (2005)
    • 1.xx Error 2020: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
    • ane.21 Error 3001: S_DA_EXT_RAM_ERROR
    • 1.22 Fault 3012: NAND_FLASH_NOT_FOUND
    • one.23 Error 3140: BROM Fault: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED
    • 1.24 Error 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)
    • 1.25 Fault 3149: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
    • 1.26 Fault 3168: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3168)
    • 1.27 Error 3182: BROM Fault: S_STORAGE_NOT_MATCH (3182)
    • 1.28 Error 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)
    • 1.29 Error 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)
    • 1.30 Fault 4001: S_FT_DA_NO_RESPONSE or Da didn't ship response data to Flash Tool
    • i.31 Fault 4004: Driver Error
    • i.32 Error 4009: S_FT_READBACK_FAIL (4009)
    • one.33 Error 4010: BROM Mistake : S_FT_FORMAT_FAIL
    • ane.34 Error 4017: BROM Error: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)
    • i.35 Error 4032: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM neglect
    • 1.36 Error 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL
    • 1.37 Error 4058: BROM Error: S_FT_GET_MEMORY_FAIL (4058)
    • 1.38 Error 5002: S_INVALID_DA_FILE
    • 1.39 Error 5007: BROM Fault : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
    • 1.40 Error 5054: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
    • ane.41 Error 5069: BROM Fault : S_DL_PMT_ERR_NO_SPACE (5069)
    • one.42 Mistake 5056: BROM Error : S_DL_PMT_ERR_NO_SPACE (5056)
    • 1.43 Error 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR
    • one.44 Error 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)
    • i.45 Fault 6010: BROM ERROR: SP FLASHTOOL Mistake 6010 CODE DOWNLOAD FORBIDDEN
    • 1.46 Mistake 6012: BROM Error: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP Error Code: 0X00
    • i.47 Fault 6047: BROM Mistake: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL
    • 1.48 Error 6124: BROM Mistake: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR Lawmaking: 0X00
    • 1.49 Error 8038: Error 8038! Android download pmt is ready, and layout has been changed / PMT changed for the ROM
    • 1.l Error 8100:
    • 1.51 Fault 8200:
    • i.52 Error 8406: SP FLASH TOOL ERROR (8406)
    • 1.53 Fault 8417: BROM ERROR: Initialize besprinkle file failed. Delight check the scatter file proper noun you load is legal
    • 1.54 Stuck at Download DA 100%
    • 1.55 SP Flash Tool flashing process was successful, but the phone'southward calibration doesn't work
    • ane.56 USB device not recognized
    • 1.57 Mistake 0xFDA: BROM Error: S_FT_GET_MEMORY_FAIL (0xFDA)
    • 1.58 Error 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
    • one.59 Error 0x3: BROM ERROR:?? (0x3)
    • 1.60 Error 0x7D4: BROM Mistake: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
    • ane.61 Error 0x8: BROM Error:?? (0x8)
    • 1.62 Mistake OXFC0: BROM Error S_FT_ENABLE_DRAM_FAIL (OXFC0)
    • 1.63 Fault 0X411: BROM Fault: S_CHKSUM_ERROR (0X411)
    • 1.64 Mistake 0xFA1: BROM ERROR: S_FT_DA_NO_RESPONSE (0xFA1)
    • ane.65 TOOL DL image Fail!
    • 1.66 Error 0xFC0: BROM Mistake: S_FT_ENABLE_DRAM_FAIL (0xFC0)
    • i.67 Error 0xC0050003: BROM Mistake: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)
    • i.68 Error 0xc002002A: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)
    • ane.69 Fault 0XFA8: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)
    • 1.seventy Fault 0x7D5: BROM Fault: S_BROM_CMD_STARTCMD_FAIL (0x7D5)
    • 1.71 Error: Purlieus Check Failed: rom_end_addr >= next rom begin_addr.
    • 1.72 Fault 3179: BROM Fault: S_CHIP_TYPE_NOT_MATCH (3179)
    • 1.73 Error 5073: BROM Mistake: S_DL_READ_PT_FAIL (5073)
    • one.74 SP Flash Tool force-closes when scatter file is loaded
    • 1.75 Storage type mismatch!
    • 1.76 Fault 8045: No Valid Segmentation Direction Table (PMT) for storage
    • 1.77 Mistake 1041: BROM ERROR: S_CHKSUM_ERROR (1041)
    • ane.78 Error 6126: BROM ERROR: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE Lawmaking: 0x00
    • 1.79 Mistake 6128: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP Mistake Code: 0X00
    • 1.80 Mistake 0xC0050005: ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)
    • ane.81 Mistake (3): BROM Error:?? (3)
    • 1.82 Error 6104: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR Lawmaking: 0X00
    • 1.83 Error 3183: BROM Error: S_CHIP_TYRE_NOT_MATCH (3183)
    • 1.84 Error 0xC0060001: BROM Error: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)
    • i.85 Error: PMT changed for the ROM; it must be downloaded
    • 1.86 Error 6004: ERROR: S_SECURITY_SLA_FAIL (6004), MSP ERROE Lawmaking: 0X00
    • 1.87 Error 6045: S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045), MSP ERROE Lawmaking: 0x00
    • i.88 Error 2035: BROM Mistake: S_BROM_CMD_JUMP_DA_FAIL (2035)
    • i.89 Error 0x412: BROM Error: S_TIMEOUT (0X412)
    • 1.90 Mistake 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE CODE: 0x00
    • ane.91 Error 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]
    • one.92 Error 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)
    • 1.93 Error 0xC52: BROM Fault: S_DA_SDMMC_WRITE_FAILED (0XC52)
    • 1.94 Error 0XFAA: BROM Fault: S_FT_FORMAT_FAIL (0XFAA)
    • 1.95 Error 5072: Error: S_DL_WRITE_PT_FAIL (5072)
    • 1.96 Error 0xC0070004: Error: STATUS_DA_HASH_MISMATCH (0xC0070004)
    • 1.97 Error 6046: BROM Error: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP Fault CODE: 0X0
    • 1.98 Error 0XC0060003: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
    • ane.99 Error 0x94010000: Scrap Type Non match! target refuse value: 0x94010000
    • 1.100 Mistake 0xC0020029: BROM ERROR: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)
    • 1.101 Fault 5000: BROM Fault: S_AUTH_HANDLE_IS_NOT_READY (5000)
    • ane.102 Mistake 0xC002002C: Mistake: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)
    • ane.103 Error 0xC0030012: ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)
    • 1.104 Fault 0xC0060005: ERROR: STATUS_BROM_CMD_FAIL (0xC0060005)
    • 1.105 Error 8: Mistake: ?? (viii)
    • i.106 Error 0xC0030001: Error: STATUS_SCATTER_FILE_INVALID (0xC0030001)
    • 1.107 Error: Partition[nvram] should Non gear up "is_download" to truthful in scatter file
    • 1.108 Fault 0xC0050001: ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
    • 1.109 Fault 0xC002001B: Mistake: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)
    • one.110 Error 5014: Error: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)
    • 1.111 Error 0x7F3: BROM Fault: S_BROM_CMD_JUMP_DA_FAIL
    • 1.112 Fault 3154: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3154)
    • 1.113 Error 0xC0010005: BROM ERROR: STATUS_PROTOCOL_ERR (0xC0010005)
    • 1.114 Error 0xC0010007: BROM ERROR: INSUFFICIENT_BUFFER (0xC0010007)
    • 1.115 Fault 0xC0050007: ERROR: STATUS_READ_DATA_EXCEPTION (0xC0050007)
    • 1.116 Error 0x13CD: BROM Fault: S_DL_PMT_ERR_NO_SPACE (5069)
    • 1.117 Error: LIB DA not match, delight re-select DA or ask for help
    • 1.118 Error -1073283068: BROM Mistake: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE Code: 0X00
    • i.119 Mistake 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)
    • 1.120 Error 3152: S_DA_SDMMC_CONFIG_FAILED (3152)
    • ane.121 Error 0xC0020006: Mistake: STATUS_SEC_PL_VFY_FAIL (0xC0020006)
    • one.122 Error 0xC0030003: Mistake: STATUS_DA_SELECTION_ERR (0xC0030003)
    • 1.123 Fault 0xC0030008: Error: STATUS_INVALID_GPT (0xC0030008)
    • 1.124 Error 0xC0050004: Error: STATUS_UPLOAD_EXCEPTION (0xC0050004)
    • ane.125 Error 0x1: Fault: ?? (0x1)
    • 1.126 Error 0xC0030004: ERROR: STATUS_PRELOADER_INVALID 0xC0030004
    • ane.127 Error 1003: ERROR: S_INVALID_BBCHIP_TYPE (1003)
    • 1.128 Error 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)
    • 1.129 Error 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)
    • 1.130 Error 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Where to Download SP Wink Tool Latest and Older Versions?

Download the latest and older versions of the SP Flash Tool from Get SP Wink Tool.

How to Prepare SP Flash Tool Errors (BROM Fault Codes):

SP Flash Tool Failed to enumerate COM Port

This error clearly means that the Flash Tool has issues finding the COM port on which your device is connected.

Solution:

  1. Make sure to run SP Flash Tool equally administrator on your estimator. (A viewer suggested this solution, equally it helped him fix the failed to enumerate COM Port result.)
  2. Connect your watch to another Port and brand certain you have USB Drivers installed.
  3. Open "Device Director" and discover the COM port of the device yous connected. Once plant, open Wink Tool, click on Options -> COM Port -> Select the COM Port on which you have continued your device.

The device automatically disconnects during flashing

Meaning: Device disconnects equally soon as the flashing process begins, interrupting the process.

Solution:

  1. Try a different USB Cord, USB Port & PC
  2. Agree the Volume Down or Up push button while connecting the device to the PC for flashing

SP Wink Tool remains at 0%

Solution:

  1. Install necessary MediaTek VCOM drivers on PC.
  2. Apply the latest version of SP Flash Tool - Download

Follow the troubleshooting guide on how to set up the Wink tool Stuck at 0% (waiting) issue.

Fault: Initialize scatter file failed. Please bank check the scatter file name you load is legal

Meaning: SP Wink Tool doesn't accept the proper noun of the scatter file.

Solution:

  1. Make sure the scatter file was non renamed.
  2. Try a higher version of SP Wink Tool [Download]

Error: USB device not recognized

This fault occurs while you connect your device to the PC. It shows a prompt on the organization tray after connecting your device.

Pregnant: PC is having trouble communicating with your device (It occurs due to break, hardware, or commuter problems).

Solution:

  1. Try a different USB Cord, USB Port, or PC.
  2. Install the latest MediaTek USB drivers on PC.

Fault: Please select 1 ROM at least earlier execution

Meaning: SP Flash Tool fails to recognize that in that location is an item ticked.

Solution:

  1. Select the Scatter file again and untick all the items which you don't desire to flash one by one. Don't employ the checkbox, which un-ticks all the things at once and so checks one by one.

Error: PRO_INFO: Failed to become PMT info

Meaning: SP Flash Tool is having problems reading the telephone.

Solution:

  1. Use different PC and USB Cable.
  2. Ensure that the telephone is powered off with a charged battery inside when connecting.

Note: Some phones require you to remove the battery while flashing. In this case, Solution 1 is the ane yous should follow.

Fault 1002: S_INVALID_ARGUMENTS

Meaning: Invalid Scatter file.

Solution: Load the correct scatter file.

Error 1012: BROM Mistake: S_NOT_ENOUGH_MEMORY (1012)

Meaning: The version of SP Flash Tool doesn't back up the size(south) of the file(s) in the firmware or ROM.

Solution:

  1. Use the latest version of Flash Tool [Download]

Error 1003: S_COM_PORT_OPEN_FAIL (1003)

Meaning: SP Flash Tool encountered an error while communicating with the device via the target port.

Solution:

  1. Connect the device to a different USB Port on the PC
  2. Try unlike versions of SP Flash Tool [Download]
  3. Endeavour using different USB Cable
  4. Brand certain the device's USB port is non damaged

Error 1013: BROM ERROR: S_COM_PORT_OPEN Neglect (1013)

Significant: SP Flash Tool encountered an mistake while communicating with the device via the target port.

Solution:

  1. Connect the device to a unlike USB Port on the PC
  2. Try different versions of SP Wink Tool [Download]
  3. Try using different USB Cablevision
  4. Make sure the device's USB port is not damaged

Error 1011: S_NOT_ENOUGH_STORAGE_SPACE

Meaning: The size of any part of the firmware is larger than the allotted space (unremarkably a block or cadre)

Solution:

  1. Change the version of the SP Flash Tool. Download from here.

Note: Information technology is learned that this error sometimes occurs on the "raw" versions of the flash tool. So changing the version might assist.

Mistake 1022:

Significant: The version of the SP Flash tool is not compatible with your device, or the USB interface is non working.

Solution:

  1. Utilise the different or latest version of SP Flash Tool - Download
  2. Change USB Cablevision or USB Port.

Error 1040: S_UNSUPPORTED_OPERATION (1040)

Significant: Wink kicking files & Scatter.txt don't match.

Solution:

  1. Brand sure the correct scatter file is loaded.

Mistake 1042: BROM Mistake: S_TIMEOUT (1042)

Meaning: The flashing process took too long, and the SP Wink Tool encountered a timeout.

Solution:

  1. Try flashing 1 file at a fourth dimension
  2. Utilise the latest version of SP Flash Tool [Download]
  3. Use dissimilar PC and USB Cable

Error 2: BROM ERROR: ?? (2)

Pregnant: SP Flash Tool was unable to communicate with the device.

Solution:

  1. Endeavor using a unlike PC (preferably Windows 7)
  2. Install MediaTek USB Drivers on PC
  3. Use another USB Cable

Error 4008: BROM Error : S_FT_DOWNLOAD_FAIL (4008)

Pregnant: There is an suspension between the SP Wink Tool and the device advice, and the SP Flash Tool encountered an error while flashing files.

Solution:

  1. Take out the battery and re-insert it back.
  2. Employ unlike USB Cable, Port, and PC.
  3. Right click flash_tool.exe -> Backdrop -> Compatibility -> Set to Windows XP Service Pack iii -> Apply -> OK -> Run flash_tool.exe equally administrator.
  4. Make sure the battery has enough accuse left.

Error 2004: BROM Mistake : S_FT_DOWNLOAD_FAIL (2004)

Meaning: There is an interruption between the SP Wink Tool and the device communication, and the SP Flash Tool encountered an error while flashing files.

Solution:

  1. Take out the battery and re-insert it dorsum.
  2. Utilise different USB Cable, port, and PC.
  3. Right click flash_tool.exe -> Backdrop -> Compatibility -> Gear up to Windows XP Service Pack 3 -> Apply -> OK -> Run flash_tool.exe every bit ambassador.
  4. Make sure the battery has enough charge left.

Error 2005: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Pregnant: Device attempted to ability on before SP Flash Tool could wink the files to it.

Solution:

  1. Take out the bombardment and re-insert information technology dorsum.
  2. Use different USB Cable, port, and PC.
  3. Right click flash_tool.exe -> Properties -> Compatibility -> Prepare to Windows XP Service Pack three -> Apply -> OK -> Run flash_tool.exe as ambassador.
  4. Make certain the battery has enough charge left.

Error 2020: BROM Error : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)

Meaning: Wink Tool encountered a trouble moving files to be flashed to the device's internal SRAM.

Solution:

  1. use the latest version of the SP wink tool [Download Hither]
  2. In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery".
  3. Utilise the Format all + Download option
  4. Hold both book buttons before connecting to the PC for flashing and release in one case flashing begins

Mistake 3001: S_DA_EXT_RAM_ERROR

The SP Flash Tool Error 3001 occurs due to connection problems. Check the cable and reconnect to another port. If it all the same occurs, try using a dissimilar PC.

Mistake 3012: NAND_FLASH_NOT_FOUND

Meaning: Problem associated with the definition of flash retentivity.

Solution:

  1. Use the different version of flash tools - Download
  2. Use dissimilar PC, USB Cablevision, and USB Port.

Error 3140: BROM ERROR: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED

Significant: SP wink tool encountered an fault flashing a selected file to a non-specified partition

Solution:

  1. Apply the latest version of SP Flash Tool - Download
  2. Use format option and then download in SP Flash Tool

Error 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)

Meaning: Flash kick files and besprinkle mismatch. Note EMMC sectionalisation device and MTD partitioning device use dissimilar TXT boot files.

Solution:

  1. Cull the correct Scatter file.
  2. Apply a different PC (preferably Windows XP) with all the drivers loaded.

Error 3149: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)

Significant: SP Wink tool is unable to wink files to the device.

Solution:

  1. Use the latest version of the SP flash tool and run it as administrator. [Download here]
  2. Format first and then Download
  3. Don't tick a box with an unspecified/empty file path
  4. Ensure the phone is switched off and has enough charge before connecting to the PC for flashing
  5. Try a different PC
  6. Endeavor a different ROM
  7. Try a different USB string
  8. Try formatting the phone showtime before flashing files to it

Error 3168: BROM Error: S_CHIP_TYPE_NOT_MATCH (3168)

Meaning: SP Flash Tool detects that at that place is a mismatch betwixt the information provided in the scatter file and the device'due south info.

Solution:

  1. Make sure you are using the correct ROM file for your device.
  2. Use the higher version of SP Flash Tool - Download hither
  3. Install correct drivers on PC.

Error 3182: BROM Fault: S_STORAGE_NOT_MATCH (3182)

Meaning: The firmware you lot are trying to flash is non compatible with your device.

Solution: Try getting the advisable firmware for your device model.

Error 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)

Pregnant: The firmware yous are trying to flash is not compatible with your device.

Solution: Try getting the appropriate firmware for your device model.

Error 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)

Meaning: The firmware you are trying to wink is non compatible with your device.

Solution: Try getting the appropriate firmware for your device model.

Error 4001: S_FT_DA_NO_RESPONSE or Da didn't send response data to Flash Tool

Meaning: SP Flash Tool facing trouble communicating with the device.

Solution:

  1. Utilize a different USB Port.
  2. Install MediaTek VCOM drivers on PC.
  3. Run Flash_tool.exe as administrator.
  4. Apply a dissimilar PC (preferably Windows 7 or XP).
  5. Attempt different USB Cable.

Mistake 4004: Driver Error

Meaning: Drivers not found or corrupted.

Solution: Uninstall drivers and re-install them.

Error 4009: S_FT_READBACK_FAIL (4009)

Significant: SP Flash Tool failed to create a Readback file, mayhap due to not enough space for a file or file cannot be overwritten because it is locked.

Solution:

  1. Use the different version of SP Flash Tool [Download]
  2. Delete old Readback files

Error 4010: BROM ERROR : S_FT_FORMAT_FAIL

Pregnant: The blocks map in the scatter file doesn't match the device'south segmentation sizes

Solution:

  1. Use the correct firmware for your device model.
  2. Utilise the latest version of SP Wink Tool [Download]

Mistake 4017: BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)

Meaning: Y'all're trying to flash a file that has non been processed for flashing via the SP wink tool

Error 4032: BROM Error : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Meaning: The firmware yous're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:

  1. Ensure that the firmware you are flashing is made for your device model.
  2. Delete the SP Flash Tool folder and re-extract it.
  3. Ensure yous tick the boxes for only the files present in the ROM you're about to wink
  4. Might accept the wrong driver installed. Uninstall the VCOM, Preloader, and MTK drivers and re-install them.

Error 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL

Pregnant: The SP Wink Tool Error Code 4050 occurs when block sizes are not the same in the PMT and scatter. In full general, this fault is treated to download all the blocks (i tin use information enough), and then the size in the PMT should switch to the correct.

Solution:

  1. Utilise a dissimilar version of Flash Tool - Download

Error 4058: BROM Fault: S_FT_GET_MEMORY_FAIL (4058)

Pregnant: Flash tool was unable to locate the partitioning you're trying to flash.

Solution: Un-tick any item with a blank or empty location

Error 5002: S_INVALID_DA_FILE

Significant: The Download Agent (DA) file selected is non uniform. DA file is attached to the Flash Tool release, so cull the 1 which is provided in the Flash Tool binder.

Solution:

  1. Cull the DA file from the SP Wink Tool folder.

Error 5007: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

Meaning: You're trying to flash a file with the unspecified path (no file selected in the particular box)

Solution:

  1. Brand sure the scatter file is in the aforementioned binder where the other files to be flashed are located.
  2. Untick whatsoever detail whose file you practise not accept or whose path is not specified.

Error 5054: BROM Error S_DL_GET_DRAM_SETTINGS_FAIL (5054)

Meaning: The files you are trying to wink are not compatible with the device.

Solution:

  1. Ensure you are using the correct files.

Error 5069: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

Meaning: The size of a file is larger than the available partition size.

Solution:

  1. Ensure that you are flashing the right files to the device.
  2. Effort another ROM.

Fault 5056: BROM Error : S_DL_PMT_ERR_NO_SPACE (5056)

Significant: The size of a file is larger than the available partition size.

Solution:

  1. Ensure that you are flashing the right files to the device.
  2. Try another ROM.

Error 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR

Meaning: Wrong files. The Scatter file of the chosen folder is not yet prepared for the FT files.

Solution:

  1. Choose the correct scatter file prepared for the FT files.

Error 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)

Significant: When you choose the wrong file, for example, another type of flash downloads into the current wink, the tool will warn with this message. The chosen wink files are not compatible with your device.

Mistake 6010: BROM ERROR: SP FLASHTOOL Mistake 6010 Code DOWNLOAD FORBIDDEN

Pregnant: The device has a protected or locked bootloader.

Solution: Unlock the bootloader on your device.

Fault 6012: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP Fault CODE: 0X00

Pregnant: The Download-Agent being used is incompatible with the device.

Solution: Set Download-Agent to MTK_AllInOne_DA.bin

Error 6047: BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL

Pregnant: Hash (integrity) check of the files being flashed failed.

Solution:

  1. Employ SP Flash Tool V5.1516.00 from here
  2. Select the right Download Agent file
  3. Navigate to Options > Option > Download and untick DA DLL All…

Error 6124: BROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR Lawmaking: 0X00

Meaning: Wrong flash settings or firmware.

Solution:

  1. Use the right firmware for your exact device model
  2. Select the correct Download Agent file in the SP flash tool
  3. Go to Options > Option > Connectedness > USB Speed > Full Speed
  4. Go to Options > Option > Download > Untick DA DL All with Checksum

Error 8038: Error 8038! Android download pmt is set up, and layout has been inverse / PMT inverse for the ROM

Meaning: SP Flash Tool is having problem writing to certain partitions due to some incompatibility.

Solution:

  1. Format the telephone in the SP flash tool (Do non format bootloader) then try flashing the files again using Download
  2. If Download doesn't piece of work and so practise a firmware upgrade
  3. If the MTK backup contains more than one besprinkle file, retry flashing with the other scatter file.
  4. If that isn't feasible, try formatting kickoff or apply the firmware upgrade
  5. If that doesn't work, open the besprinkle file using Notepad++ and modify __NODL_FAT to FAT past removing "__NODL_".

Error 8100:

Meaning: Cannot find the USB port.

Solution:

  1. Install the Drivers. If already installed, uninstall them and re-install them again.

Error 8200:

Significant: Invalid file or incompatible recovery file.

Solution:

  1. Find the right recovery file.
  2. Use the latest version of the SP Flash Tool. [Download Here]

Error 8406: SP Wink TOOL ERROR (8406)

Significant: Compatibility issues.

Solution:

  1. Flash the right firmware for your verbal device model.
  2. Update VCOM drivers.

Error 8417: BROM Error: Initialize scatter file failed. Delight cheque the besprinkle file name you load is legal

Meaning: The format of the Scatter file is invalid.

Solution:

Open the scatter file in Notepad++, the outset line must showtime with:

############################################################################################################## General Setting #

If there is annihilation else above this so delete it and save the scatter file.

Stuck at Download DA 100%

Pregnant: SP Flash Tool is having trouble communicating with your device.

Solution:

  1. Uninstall and re-install MediaTek drivers.

SP Flash Tool flashing process was successful, but the phone'southward calibration doesn't work

If, after flashing the files using SP Wink Tool soft keys and touch doesn't work or respond, follow the below solution.

Solution:

Edit the scatter file using Notepad++ and remove the NODL_ (or fix is_download: faux to is_download: true) in front of the items yous take in the backup binder simply aren't listed when y'all load the scatter file in the SP flash tool. Removing NODL_ or setting is_download to true makes the detail listed/bachelor in the SP wink tool when you load the scatter file after saving it.

USB device not recognized

Meaning: The PC is having trouble communicating with your device because of suspension, hardware, or driver problem.

Solution:

  1. Remove and install the MediaTek MTK drivers again on your PC.
  2. Try a unlike USB cable.
  3. Connect the device to a different USB Port.
  4. If the above solutions don't piece of work, try using another PC.

Mistake 0xFDA: BROM Fault: S_FT_GET_MEMORY_FAIL (0xFDA)

Pregnant: SP Flash Tool encountered an error reading your device's storage.

Solution:

  1. Try a different USB cablevision.
  2. Connect the device to a different USB Port.
  3. If the above solutions don't work, endeavour using another PC.

Mistake 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

Significant: The firmware you are trying to flash is either not uniform or you have selected the wrong flashing settings.

Solution:

  1. Make sure that the firmware you lot are trying to flash is really for your device model.
  2. Only tick the boxes only for the files which are available in the ROM binder yous're trying to flash.

Error 0x3: BROM Fault:?? (0x3)

Meaning: SP flash tool encountered an error maintaining the connectedness with the device during the flashing procedure.

Solution:

  1. Uninstall and re-install MTK VCOM drivers on your PC.
  2. Try a different USB cable.
  3. Connect the device to a different USB Port.
  4. If the above solutions don't work, try using another PC.

Error 0x7D4: BROM Fault: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)

Meaning: SP Flash Tool encountered an fault writing to the device.

Solution:

  1. Endeavour changing the Download Agent (Secure Kick DA) file.
  2. Use the latest version of SP Flash Tool – Download here.
  3. Make sure that your device's battery is sufficiently charged.
  4. Make certain the device's USB port is non damaged.
  5. Ensure that the file names friction match what'southward in the besprinkle file.
  6. Try a different USB cable.
  7. Connect the device to a different USB Port.
  8. If the in a higher place solutions don't work, try using some other PC.

Error 0x8: BROM Mistake:?? (0x8)

Pregnant: The size of the file you are trying to flash is larger than the division size.

Solution:

  1. Ensure that the files you lot're trying to flash are really for your device's exact model.
  2. Try another Stock ROM.
  3. Change the phone's EMMC chip.
  4. Endeavor using a different PC.

Mistake OXFC0: BROM Fault S_FT_ENABLE_DRAM_FAIL (OXFC0)

Meaning: The firmware y'all're trying to flash is either not uniform with your device or you have selected the incorrect flashing settings.

Solution:

  1. Ensure that the files you're trying to flash are really for your device's exact model.
  2. Only tick the boxes only for the files which are available in the ROM y'all're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Use the latest version of the Smartphone Flash Tool.
  5. Delete the SP Wink Tool folder and re-extract information technology.
  6. Ensure that the phone is powered off (with the battery inserted) before connecting to the PC for flashing.
  7. If the above solution doesn't work, then you can effort belongings downwardly the Book Down button and connect the phone to the PC. You can also endeavour holding Volume Upwards, Power and Volume Downwardly, Power, and Volume UP buttons.
  8. Format the telephone from Settings before trying to flash the files again.

Error 0X411: BROM ERROR: S_CHKSUM_ERROR (0X411)

Meaning: At that place was a checksum error when flashing the firmware.

Solution:

  1. Delete any file with the checksum in its proper noun from the ROM/firmware binder.
  2. Become to Options > Option > Download > United nations-tick DA DL all with checksum.

Error 0xFA1: BROM Fault: S_FT_DA_NO_RESPONSE (0xFA1)

Meaning: SP wink tool encountered an error communicating with the device.

Solution:

  1. Install MTK VCOM drivers on your PC. If already installed, uninstall and re-install them.
  2. Ensure that the device is powered off and has charged battery inserted.
  3. Do not hold any button when connecting the device to the PC for flashing.
  4. Try a dissimilar USB cable.
  5. Connect the device to a different USB Port.
  6. If the above solutions don't work, try using some other PC.

TOOL DL image Fail!

Meaning: DA DL all with the Checksum pick, is disabled in the SP flash tool.

Solution:

  1. In SP Wink Tool, navigate to Options > Option > Download > Tick DA DL all with checksum and re-flash the firmware.

Error 0xFC0: BROM ERROR: S_FT_ENABLE_DRAM_FAIL (0xFC0)

Meaning: The firmware you're trying to wink is either non compatible with your device or you take selected the incorrect flashing settings.

Solution:

  1. Ensure that the files you're trying to flash are really for your device's verbal model.
  2. Merely tick the boxes only for the files which are available in the ROM you lot're trying to wink.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Employ the latest version of the Smartphone Flash Tool.
  5. Delete the SP Flash Tool folder and re-extract it.
  6. Ensure that the phone is powered off (with the battery inserted) before connecting to the PC for flashing.
  7. If the above solution doesn't work, then you lot can try property down the Volume Down button and connect the telephone to the PC. Yous tin likewise attempt property Volume UP, Power and Volume Down, Power, and Volume Upwardly buttons.
  8. Format the phone from Settings before trying to flash the files again.

Mistake 0xC0050003: BROM Fault: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)

Meaning: SP flash tool encountered an error writing to one or more than partitions.

Solution:

  1. Download the latest version of the Smart Phone Flash Tool and re-flash the firmware.
  2. Try flashing 1 partition at a time to figure out which partition is resulting in the error.
  3. Attempt a dissimilar USB cablevision.
  4. Connect the device to a different USB Port.
  5. If the above solutions don't work, try using another PC.

Error 0xc002002A: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)

Meaning: The firmware you're trying to flash is either not uniform with your device, or you lot have selected the wrong flashing settings or verified boot is enabled.

Solution:

  1. Unlock the bootloader before flashing the firmware.
  2. Ensure that the files you're trying to flash are actually for your device's exact model.
  3. Only tick the boxes but for the files which are available in the ROM you lot're trying to flash.
  4. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  5. Apply the latest version of the Smartphone Flash Tool.
  6. Delete the SP Wink Tool binder and re-extract it.
  7. Ensure that the telephone is switched off (with the battery inserted) before connecting to the PC for flashing.
  8. If the higher up solution doesn't piece of work, then you tin can endeavour holding down the Volume Down button and connect the phone to the PC. You can besides try holding Book Upwards, Power and Volume Down, Ability, and Volume Up buttons.
  9. Format the phone from Settings before trying to wink the files once again.

Error 0XFA8: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)

Pregnant: SP flash tool encountered an fault while attempting to flash the firmware.

Solution:

  1. Make sure that the device is switched off, and the battery is in the device before connecting for flashing.
  2. Employ the format pick and and so download information technology in the SP flash tool.
  3. Try changing the Download Amanuensis setting in Smartphone Flash Tool.
  4. Try a different USB cable.
  5. Try connecting the device to a dissimilar USB Port.
  6. Try using a different PC.

Error 0x7D5: BROM Mistake: S_BROM_CMD_STARTCMD_FAIL (0x7D5)

Pregnant: The device attempted to power on before the SP flash tool could flash the files to it.

Solution:

  1. Make sure the battery is sufficiently charged on your device.
  2. Take out and re-insert the battery.
  3. Endeavor using a different USB cable or COM port or PC.
  4. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack three -> Apply -> OK -> Run flash_tool.exe as ambassador.
  5. Practice not hold whatever button when connecting to the PC.

Error: Purlieus Check Failed: rom_end_addr >= side by side rom begin_addr.

Meaning: The firmware has a sectionalisation that wasn't included while bankroll up the firmware. SP Flash Tool encountered an mistake in the stop address of the preloader partition and the begin accost of the PGPT segmentation (i.e., the partition which wasn't included in the backup).

Solution:

  1. Close the fault message and manually select the location of all the files in the scatter file from the lesser to the top. Meaning that a preloader would be the last thing y'all will select.
  2. If that doesn't work, open and modify the scatter file using Notepad++ then change the "boundary_check: True" to "boundary_check: Faux".

Fault 3179: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3179)

Significant: The firmware you're trying to wink is either not uniform with your device or you lot accept selected the wrong flashing settings.

Solution:

  1. Ensure that the files y'all're trying to wink are actually for your device'due south exact model.
  2. Only tick the boxes only for the files which are available in the ROM you're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Utilize the latest version of the Smartphone Flash Tool.
  5. Delete the SP Wink Tool folder and re-extract it.
  6. Ensure that the phone is powered off (with the battery inserted) before connecting to the PC for flashing.
  7. If the above solution doesn't piece of work, and then yous can endeavor holding down the Volume Downwardly button and connect the phone to the PC. Y'all can also try property Book Up, Ability and Book Downward, Power, and Book UP buttons.
  8. Format the phone from Settings before trying to flash the files again.

Error 5073: BROM ERROR: S_DL_READ_PT_FAIL (5073)

Meaning: Smartphone flash tool encountered an error while trying to format the device.

Solution:

  • Use "download merely" under the download tab to flash the firmware, and so you lot tin can format the device if needed.

SP Flash Tool force-closes when scatter file is loaded

Significant: SP Flash Tool doesn't support the besprinkle file because of its blocks or configuration.

Solution:

  • Open the scatter file using Notepad++ and locate the final sectionalization on the list (flashinfo) and change the is_download: truthful to is_download: simulated. Once done, save the scatter file and reload information technology in SP Flash Tool.

Storage type mismatch!

Bulletin:

scatter storage type is HW_STORAGE_EMMC

target storage type is HW_STORAGE_NAND

(or)

scatter storage type is HW_STORAGE_EMMC

target storage blazon is HW_STORAGE_NONE

Pregnant: There is a mismatch between the device's storage type and that which the besprinkle file expects.

Solution:

  1. Endeavour using a dissimilar firmware or ROM.
  2. Effort using SP Flash Tool version 3.x. If it doesn't work, try using unlike versions and make sure to run information technology every bit ambassador.

Error 8045: No Valid Partition Management Table (PMT) for storage

Meaning: SP Wink Tool failed to place the device'south partition ahead of the file writes.

Solution:

  • Try flashing the firmware using Download only.

Error 1041: BROM Mistake: S_CHKSUM_ERROR (1041)

Meaning: There was a checksum error when flashing the firmware.

Solution:

  1. Delete whatsoever file with the checksum in its name from the ROM/firmware folder.
  2. Go to Options > Option > Download > Un-tick DA DL all with checksum.

Fault 6126: BROM Fault: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE Code: 0x00

Meaning: The ROM contains a checksum file, only DA DL All With CheckSum is un-checked.

Solution:

  • Tick DA DL All With Bank check Sum under Options > Option > Download.

Error 6128: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP Mistake Lawmaking: 0X00

Meaning: The ROM contains a checksum file, but DA DL All With CheckSum is united nations-checked.

Solution:

  • Tick DA DL All With Check Sum under Options > Option > Download.

Error 0xC0050005: ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the incorrect flashing settings.

Solution:

  1. Ensure that the files you're trying to flash are actually for your device's exact model.
  2. Only tick the boxes only for the files which are available in the ROM you're trying to wink.
  3. Brand sure your device's bombardment is sufficiently charged.

Error (3): BROM ERROR:?? (iii)

Pregnant: There is a problem with the format of the scatter file or files being flashed. Instance – trying to flash .bin files using SP Flash Tool.

Solution:

  • Cheque the scatter file and firmware files y'all are trying to flash to make sure that they're not meant to exist flashed using a unlike tool.

Error 6104: BROM Mistake: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR Lawmaking: 0X00

Meaning: Wrong flash settings or firmware/ROM files.

Solution:

  1. Brand sure you accept selected the right Download Amanuensis file in SP Flash Tool and are using the firmware meant for your device's exact model.
  2. Go to Options > Option > Connexion > USB Speed > Total Speed.
  3. Go to Options > Pick > Download > united nations-tick DA DL ALL with Checksum.

Error 3183: BROM ERROR: S_CHIP_TYRE_NOT_MATCH (3183)

Pregnant: SP Flash Tool believes that there is a mismatch between the information provided in the scatter file and device info.

Solution:

  1. Make sure to use the ROM/firmware for the exact device model.
  2. Endeavour using the higher version of the SP Wink Tool.
  3. Uninstall and re-install the MediaTek MTK USB Drivers on your PC.

Error 0xC0060001: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)

Significant: The device attempted to power on before the SP flash tool could flash the files to it.

Solution:

  1. The device might crave a custom Download Agent (DA) to exist flashed.
  2. Make certain the battery is sufficiently charged earlier flashing.
  3. Have out and re-insert the bombardment.
  4. Try using a unlike USB cable or COM port or PC.
  5. Correct click flash_tool.exe -> Properties -> Compatibility -> Fix to Windows XP Service Pack iii -> Apply -> OK -> Run flash_tool.exe as ambassador.
  6. Do not hold any button when connecting to the PC.

Error: PMT changed for the ROM; information technology must exist downloaded

Pregnant: The partition tabular array well-nigh to be written (from the scatter file) is different from the device's electric current partition table layout.

Solution:

  1. Ensure that the scatter file and firmware/ROM files you're trying to flash are for your device's exact model.
  2. If you're trying to flash only a few files from the firmware, then you need to get the firmware to complement and and then flash using download simply.
  3. If you're trying to flash the complete firmware, and then try using the "Firmware Upgrade" selection or Format get-go earlier the "download just" option.

Error 6004: ERROR: S_SECURITY_SLA_FAIL (6004), MSP ERROE Lawmaking: 0X00

Meaning: The Download Agent file isn't compatible with the device.

Solution:

  1. Try using a different Download Amanuensis file.
  2. Effort using a different version of the Smartphone Wink Tool.
  3. Ensure you lot are using the right Authentication file.

Meaning: The image files you are trying to flash practise not comprise –sign header.

Solution:

  1. Utilise the SP Flash Tool v5.1532.00 – Download here.
  2. Load the Auth file for the device in the flash tool.
  3. Try flashing a factory-signed firmware.
  4. Wink the unsigned image using the 'Write Memory' tab in SP Flash Tool. To actuate the write memory tab, press 'Ctrl + Alt + V' to enable advanced mode and and so click Window > Write Retentivity.

Fault 2035: BROM Mistake: S_BROM_CMD_JUMP_DA_FAIL (2035)

Meaning: SP Flash Tool encountered an error connecting to the device.

Solution:

  1. Ensure that the bombardment is inserted, and you're not property any push button when connecting the device to a PC for flashing.
  2. Uninstall and re-install the MediaTek MTK VCOM Drivers.
  3. Disable any modem manager or software which might be blocking ports on the PC.
  4. Linux / Ubuntu users, brand sure you installed 'libusb-dev' then blacklist Ubuntu's modem director (because it controls port /dev/ttyACM0, which is causing SP Flash Tool from running properly).

Mistake 0x412: BROM ERROR: S_TIMEOUT (0X412)

Significant: SP Flash Tool encountered a timeout when trying to flash, i.e., flashing took long to kickoff or consummate.

Solution:

  1. Make sure that files are loaded in SP Flash Tool with a valid location. The location should not be empty.
  2. Try flashing i file at a time.
  3. Try using a higher version of the Smart Phone Flash Tool.
  4. Un-tick larger files or find smaller alternatives.

Error 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE Lawmaking: 0x00

Significant: SP Flash Tool failed to authenticate the files you are trying to flash.

Solution:

  1. Endeavour another ROM/firmware from a unlike source.
  2. Get an Auth file for your device model.
  3. For Tecno, Infinix, and Itel devices, use Software Download Tool (Format + Download).

Error 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]

Meaning: The SP Flash Tool Error Code 0x93AF ways that the tool encountered a checksum fault.

Solution:

  1. Open the checksum file using Notepad++ and search for 0x93af and replace it with 0x94ae.
  2. Delete any checksum file from the ROM/firmware files.

Error 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)

Meaning: The besprinkle file has an incorrect format. Information technology has been badly created or modified.

Solution:

  1. Download a dissimilar scatter file that doesn't throw an error in SPFT. Now open the two scatter files using Notepad++, and y'all volition notice that the incorrect scatter file has the items slightly shifted to the left. Edit the incorrect scatter file to the same format equally in the working scatter file.
  2. After modifying the scatter file using the in a higher place method, use the latest version of SP Flash Tool e.g., SP Flash Tool v5.1728.
  3. Download another ROM/firmware from a unlike source.

Error 0xC52: BROM Mistake: S_DA_SDMMC_WRITE_FAILED (0XC52)

Meaning: SP Flash Tool was unable to flash files to the device.

Solution:

  1. Make certain to employ the latest version of the SP Flash Tool and run it as administrator.
  2. Format first then Download.
  3. Un-tick the box with an unspecified/empty file path.
  4. Ensure that the battery is sufficiently charged and the device is switched off before connecting to the PC for flashing.
  5. Endeavour a different ROM from a dissimilar source.
  6. Try formatting the device first before flashing the files.
  7. Try a different USB cable.
  8. Connect the device to a unlike USB Port.
  9. If the above solutions don't work, endeavor using another PC.

Error 0XFAA: BROM Fault: S_FT_FORMAT_FAIL (0XFAA)

Meaning: The source (firmware) doesn't properly match with the target (phone).

Solution:

  1. Endeavor using a different firmware for your device model.
  2. Ensure you're using the right tool for flashing the firmware.

Error 5072: Fault: S_DL_WRITE_PT_FAIL (5072)

Meaning: SPFT encountered a trouble writing to ane or more partitions.

Solution:

  1. Make certain the device is powered off with a charged bombardment inside earlier connecting to the PC for flashing.
  2. Don't hold any buttons when connecting to the PC.
  3. Try a dissimilar USB cable.
  4. Connect the device to a different USB Port.
  5. If the above solutions don't work, try using another PC.

Error 0xC0070004: Fault: STATUS_DA_HASH_MISMATCH (0xC0070004)

Meaning: Hash (integrity) check for the images being flashed is failed.

Solution:

  1. Utilise SP Wink Tool v5.1516.00 – Download from here.
  2. Brand sure to select the correct Download Agent file.
  3. Navigate to Options > Option > Download > United nations-tick DA DL all with checksum.

Error 6046: BROM Mistake: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP Mistake Code: 0X0

Meaning: The SP Flash Tool Error Code 6046 refers to the failed signature verification for the firmware files.

Solution:

  1. Select MTK_AllInOne_DA.bin as Download Agent file.
  2. Navigate to Options > Choice > Download > Un-tick DA DL all with Checksum.
  3. Delete any checksum file in the ROM/firmware folder.

Fault 0XC0060003: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

Significant: Smart Telephone Flash Tool is unable to read or write to the device using the selected Download Agent.

Solution:

  1. The device might require a custom Download Agent (DA) to be flashed.
  2. Make certain the bombardment is sufficiently charged before flashing.
  3. Accept out and re-insert the battery.
  4. Endeavor using a different USB cable or COM port or PC.
  5. Correct click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack 3 -> Apply -> OK -> Run flash_tool.exe equally administrator.
  6. Do not hold whatever push when connecting to the PC.

Error 0x94010000: CHIP Type Non lucifer! target refuse value: 0x94010000

Meaning: The device probable has a locked/encrypted preloader.

Solution:

  • Un-tick preloader when flashing in SP Flash Tool.

Error 0xC0020029: BROM ERROR: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)

Significant: You are trying to flash the modified files to a device that accepts only signed or verified images.

Solution:

  1. Download and wink the official firmware for your device (usually have –verified or –signed prefixes in their filename).
  2. If possible, unlock the bootloader of your device and then try re-flashing.

Mistake 5000: BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY (5000)

Meaning: The device has a secure boot/bootloader.

Solution:

  1. You lot will demand an Auth (*.auth) file or custom Download Agent (DA) file for the device to continue with flashing using SP Flash Tool.
  2. For Tecno, Infinix, and Itel devices, use Software Download Tool (Format + Download).

Error 0xC002002C: ERROR: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)

Meaning: The device has a verified boot.

Solution:

  • Download and flash the official firmware for your device (usually have –verified or –signed prefixes in their filename).

Error 0xC0030012: Fault: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)

Significant: The device has a secure boot.

Solution:

  • You will need an Auth (*.auth) file or custom Download Agent (DA) file for the device to keep with flashing using SP Flash Tool.

Error 0xC0060005: Mistake: STATUS_BROM_CMD_FAIL (0xC0060005)

Meaning: The device attempted to power on before the SP Flash Tool could flash files to it.

Solution:

  • You will demand a custom Download Agent (DA) file for your device model.

Fault 8: ERROR: ?? (eight)

Pregnant: The size of a file is larger than the available partition size.

Solution:

  1. Make certain that the firmware files you are trying to flash are actually for your device's exact model.
  2. Endeavour another Stock ROM from a unlike source.
  3. Change the device's EMMC chip.
  4. Effort using a unlike PC.

Fault 0xC0030001: Error: STATUS_SCATTER_FILE_INVALID (0xC0030001)

Significant: SP Flash Tool cannot recognize the scatter file or the location of the scatter file.

Solution:

  1. Rename the folder location of the besprinkle file, including the parent folders also, and remove all special characters / non-English characters from the binder name.
  2. If that doesn't work, then create a new folder on your desktop and copy But the firmware files to the new folder and and then retry flashing the contents from the new folder.

Fault: Sectionalisation[nvram] should Non set "is_download" to truthful in scatter file

Meaning: The scatter file specifies to download NVRAM merely doesn't specify a file proper noun for NVRAM. This mistake is common in after versions of the SP Wink Tool.

Solution:

  1. Modify the besprinkle file using notepad++ and add together a file name for the NVRAM segmentation. east.yard., "file_name: nvram.bin" then salve and ensure in that location's a nvram.bin file in the same folder as the scatter file.
  2. If that doesn't work, modify the scatter file using notepad++ and gear up "is_download: false" for the NVRAM partition.

Error 0xC0050001: ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)

Meaning: The firmware you are trying to flash is either non compatible or you have selected the wrong flashing settings.

Solution:

  1. Make sure that the firmware yous are trying to flash is really for your device model.
  2. Simply tick the boxes only for the files which are available in the ROM binder you lot're trying to wink.
  3. Uninstall and re-install MediaTek Preloader VCOM USB Drivers.

Error 0xC002001B: ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)

Meaning: The device has a verified boot.

Solution:

  • Download and wink the official firmware for your device (commonly have –verified or –signed prefixes in their filename).

Mistake 5014: Error: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)

Meaning: The scatter file was badly created or modified, depending on how you obtained the scatter file.

Solution:

  • Input the correct values for all "physical_start_addr" in the scatter file. The verbal value for "physical_start_addr" is the same equally the value of "linear_start_addr".

Error 0x7F3: BROM Fault: S_BROM_CMD_JUMP_DA_FAIL

Significant: SP Flash Tool is having trouble communicating with the device.

Solution:

  1. Ensure that the battery is inserted, and yous're non holding any push when connecting the device to a PC for flashing.
  2. Uninstall and re-install the MediaTek Preloader Drivers.
  3. Disable any modem manager or software which might be blocking ports on the PC.
  4. Linux / Ubuntu users, brand sure you installed 'libusb-dev' then blacklist Ubuntu's modem manager (considering it controls port /dev/ttyACM0, which is causing SP Flash Tool from running properly).

Error 3154: BROM Error: S_DA_SDMMC_WRITE_FAILED (3154)

Meaning: SP Flash Tool Error Code 3154 means that the flash tool is having trouble flashing files to the device.

Solution:

  1. Make sure to use the latest version of the SP Wink Tool and run it equally administrator.
  2. Format outset then Download.
  3. United nations-tick the box with an unspecified/empty file path.
  4. Ensure that the battery is sufficiently charged and the device is switched off before connecting to the PC for flashing.
  5. Attempt a unlike ROM from a different source.
  6. Try formatting the device first earlier flashing the files.
  7. Endeavor a different USB cable.
  8. Connect the device to a dissimilar USB Port.
  9. If the above solutions don't work, try using another PC.

Error 0xC0010005: BROM ERROR: STATUS_PROTOCOL_ERR (0xC0010005)

Pregnant: SP wink tool is having problem communicating with the device.

Solution:

  • Make sure that the phone is switched off with the battery inserted before connecting to the PC for flashing.

Error 0xC0010007: BROM ERROR: INSUFFICIENT_BUFFER (0xC0010007)

Pregnant: SP Flash Tool seems to be blocked from flashing files to the device.

Solution:

  • If you can boot your device into Fastboot Mode, then unlock the bootloader and then try flashing again.
  • Un-tick OEM and so retry flashing.

Error 0xC0050007: ERROR: STATUS_READ_DATA_EXCEPTION (0xC0050007)

Significant: SP Flash Tool is unable to readback from the continued device. This mistake usually occurs, peculiarly when the readback length is too big.

Solution:

  1. Download and install updated MTK drivers on your PC.
  2. If y'all're performing a readback, try skipping cache and userdata.

Error 0x13CD: BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069)

Meaning: The size of a file is larger than the bachelor partition size.

Solution:

  1. Make sure that the firmware files you are trying to flash are actually for your device'southward verbal model.
  2. Endeavor another Stock ROM from a different source.
  3. Change the device's EMMC chip.

Mistake: LIB DA not match, please re-select DA or ask for help

Pregnant: SP Flash Tool is having trouble using the selected Download Amanuensis (DA) file.

Solution:

  1. Un-tick "Check LIB DA friction match" from the SP Flash Tool general settings (Options > Pick).
  2. Try another version of the SP Flash Tool.

Error -1073283068: BROM Mistake: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE CODE: 0X00

Pregnant: The Download Agent (DA) file selected isn't uniform.

Solution:

  • Endeavour using Download Agent (DA) + Auth file + Factory ROM.

Error 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)

Pregnant: The device probable has a protected preloader or bootloader.

Solution:

  • Un-tick preloader when flashing in SP Flash Tool.

Fault 3152: S_DA_SDMMC_CONFIG_FAILED (3152)

Significant: The device likely has a protected preloader or bootloader.

Solution:

  • Un-tick preloader when flashing in SP Flash Tool.

Error 0xC0020006: ERROR: STATUS_SEC_PL_VFY_FAIL (0xC0020006)

Meaning: The device likely has a protected preloader or bootloader.

Solution:

  1. Try using a signed ROM/firmware.
  2. Try unlocking the bootloader earlier flashing.

Fault 0xC0030003: Fault: STATUS_DA_SELECTION_ERR (0xC0030003)

Meaning: The Download Agent (DA) file selected is incompatible.

Solution:

  1. Try using a different Download Agent file.
  2. Endeavor using Download Agent (DA) + Auth file + Factory ROM.
  3. Try using a unlike version of the Smartphone Flash Tool.
  4. For Tecno, Infinix, and Itel devices, utilize Software Download Tool.

Fault 0xC0030008: Fault: STATUS_INVALID_GPT (0xC0030008)

Meaning: EMMC flake is faulty on the device.

Solution:

  • Change the device'southward EMMC chip.

Error 0xC0050004: ERROR: STATUS_UPLOAD_EXCEPTION (0xC0050004)

Meaning: SP Flash Tool is unable to communicate with the device.

Solution:

  1. Effort flashing with/without the battery inserted.
  2. Try a different USB cable.
  3. Connect the device to a dissimilar USB Port.
  4. If the above solutions don't piece of work, endeavor using another PC.

Error 0x1: ERROR: ?? (0x1)

Meaning: SP flash tool is having problem communicating with the device.

Solution:

  • Endeavor using a custom Download Agent (DA) and Auth file for your device model.

Error 0xC0030004: Fault: STATUS_PRELOADER_INVALID 0xC0030004

Meaning: At that place is a problem with the preloader partition proper name in the scatter file or the flash tool is having trouble communicating with the device.

Solution:

  1. Modify the besprinkle file using Notepad++ and alter the partition name to all lower cases. Ex: PRELOADER to preloader or to friction match the exact file proper noun in the firmware and salve the scatter file.
  2. Endeavour holding the book upward or book down push before connecting the phone to the PC.
  3. If yous get an error while trying to format, return to the download tab and tick the checkbox for the preloader, so return to the format tab and retry formatting.

Error 1003: Mistake: S_INVALID_BBCHIP_TYPE (1003)

Meaning: There is a problem with the scatter file.

Solution:

  • Make sure to utilise SP Wink Tool uniform besprinkle file.

Mistake 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)

Meaning: The SP Flash Tool version you are using doesn't support your device or chipset.

Solution:

  1. Make certain you lot are using the latest version of the SP Flash Tool.
  2. Navigate to Options > Option > Un-tick Storage Life Cycle Bank check.

Error 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)

Meaning: The size of a file is larger than the bachelor partition size, or the file isn't verified or signed.

Solution:

  1. Ensure that the files you're trying to flash are actually for your device's exact model.
  2. Await for different firmware/ROM.
  3. Change the phone's EMMC scrap.
  4. Try using a different PC.

Fault 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Meaning: The SP Flash Tool is having trouble connecting with the phone, or you are flashing the wrong firmware.

Solution:

  1. If you were holding buttons, try flashing without pressing any buttons (vice versa).
  2. Try flashing a different firmware or at least the preloader from a dissimilar firmware.

These were the list of SP Flash Tool Errors and solutions to fix them. Do share this with your friends on Facebook, Twitter, and other social networking sites, etc., and help them in fixing SP Flash Tool Error they are facing.

Have we missed whatever SP Flash Tool BROM Fault? Then practise let us know in the comment department below.

πŸ‘‡πŸ‘‡Latest Video on YouTube πŸ‘‡πŸ‘‡

'; } ?>

This page may incorporate affiliate links so we earn a commission. Please read our affiliate disclosure for more info.

traskcyricionsien.blogspot.com

Source: https://www.gizmoadvices.com/list-sp-flash-tool-error-codes-solution-fix/

0 Response to "Error: Railure Reading Sector 0xfc From Hd1"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel